Metal roofing is no longer just for barns and commercial buildings. Modern standing seam and stone-coated steel systems offer the durability of industrial metal with the curb appeal of traditional shingles or shakes. At Wichita Roofing Pros, we install residential metal roofing systems designed specifically for the Kansas climate – high-wind rated, impact-resistant, and energy-reflective to keep your attic cooler in July.
Standing seam panels feature concealed fasteners – no exposed screws to back out or leak over time. The vertical ribs create clean, modern lines that complement contemporary and traditional architecture alike. Stone-coated steel (steel sheet with embedded stone granules) mimics the look of asphalt shingles, clay tile, or cedar shake while offering the same 50+ year lifespan as standing seam.
Metal is the most hail-resistant roofing material available. A Class 4 impact rating is standard on all our metal products, and many insurance carriers offer premium discounts of 25–35% for metal roofs – often enough to offset the higher upfront cost within 5–7 years. If you plan to stay in your home for 20+ years and want the lowest lifetime cost and highest storm protection, metal is the answer.
, , What Every Metal Roof Installation Includes, Full Tear-Off to Bare Deck
Concealed Fastener Panels
Ridge
All transitions – ridges, hips, valleys, chimneys, and walls – receive pre-finished metal trim that matches the panel color and directs water cleanly into gutters.
Standing Seam Panels
Steel panels with embedded stone granules – replicates the look of asphalt
or shake. Class 4 impact rating and 50-year substrate warranty.
Classic 7/8″ corrugated profile – a cost-effective option for detached garages, shops, and modern farmhouse designs. Exposed fastener system (visible screws).
Pre-bent ridge caps, gable trims, snow guards, and gutter aprons – all color-matched to your panel finish for a seamless appearance from eave to ridge.
We verify decking thickness (minimum 15/32″ plywood or strapping capability) and order custom-cut panel lengths to eliminate horizontal seams on your roof.
Old roofing removed, decking repaired. Either full synthetic underlayment (for direct-to-deck install) or 1×4 strapping (for batten/counter-batten ventilation system).
Panels are lifted to the roof and clipped into place starting at the eave. Each panel overlaps the previous by a full rib. Ridge cap and flashing are installed after the field.
All metal cut-offs, screws, and debris are removed. A final pass with a magnetic sweeper ensures your yard and driveway are free of any sharp metal scraps.