- Elevate Your Roofing Experience
- (316) 742-1900
- info@danecowichita.com
- 1809 S Hoover Rd Suite 101 Wichita, KS
Most homeowners don’t think about gutters until water is pouring into their basement or washing away the foundation landscaping they spent years building. At Wichita Roofing Pros, we take a proactive approach — designing and installing gutter systems that move water efficiently away from your home before damage has a chance to take hold.
We fabricate seamless gutters on-site using heavy-gauge aluminum, cut to the exact length your roofline requires. No joints means no seam failures, no leaking corners, and no sagging mid-run sections. Every system is pitched to code, secured with hidden hanger hardware rated for Kansas wind loads, and color-matched from a 30-shade palette to complement your home’s trim.
Our gutter guard installations keep debris out of the channel without restricting flow — critical during Wichita’s spring storm season when cottonwood seeds, oak tassels, and hail debris can overwhelm unprotected gutters in a single afternoon. Whether you need a brand-new system, a guard retrofit, or a full replacement after storm damage, we handle it cleanly and efficiently.
Every gutter run is roll-formed at your property using continuous aluminum coil stock — no pre-cut sections joined mid-run, no seam vulnerabilities at the worst possible spots.
We calculate proper gutter pitch based on your roofline length and local rainfall intensity data to guarantee water moves at the right speed — no pooling, no overflow at corners.
Downspouts are positioned at structural corners where possible and fitted with ground-level extensions or underground discharge connectors that carry water at least 6 feet from your foundation.
Before any hardware is attached, we inspect every fascia board for rot, moisture damage, and pest intrusion — flagging issues that would compromise gutter attachment before installation begins.
Heavy-gauge .032" aluminum gutters in 5" K-style or 6" half-round profiles, color-matched from a 30+ shade palette to complement any exterior finish.
Stainless steel micro-mesh guards with fine aperture screening — blocks shingle grit, seed pods, and insect debris while maintaining full water throughput during heavy rainfall.
Rectangular and round downspout options in matching or contrasting finishes, with splash blocks, buried pop-up emitters, or rain barrel adapters based on your drainage goals.
Low-voltage self-regulating heat cable installed inside gutters and downspouts to prevent ice dam formation during hard Kansas freezes — protects fascia boards and interior ceilings.
We measure every linear foot of roofline, note all downspout locations, assess fascia condition, and review your drainage grades before quoting a single dollar.
Gutters are formed on our truck using your exact measurements. Downspout sections, miters, end caps, and guard panels are staged and ready before installation begins.
Gutters are hung, guards are secured, downspouts are run and sealed, and all outlets are caulked with color-matched sealant rated for long-term exterior exposure.
We run a full water test from every downspout outlet to confirm pitch and drainage performance, then sweep all work areas and magnet the grounds for any fastener debris.
