Asbestos roofing

Asbestos roof removal and normal roof replacement might sound the same, but the truth is they are different. Normal roof replacement has to do with removing the old roof and install the new one. So, on that basis alone, it is similar to asbestos roof removal. The two projects share a lot of similarities yet remain different on so many aspects. Comparing the two projects is essential to providing a better and detailed understanding of all that is required to do a good job. This helps to avoid making avoidable mistakes and guaranteeing the efficient removal or replacement.

This is what you ought to know between asbestos roof removal and normal roof replacement.

Selecting and Hiring Right Roofer

First, the two tasks require selecting and hiring the right roofing expert. A roofer who understands and is experienced is a requirement for asbestos roof removal. Asbestos requires a different type of handling compared to normal roofing materials. The right roofer understands the hazardous nature of asbestos and endeavors to limit exposure to this harmful material as much as possible. Proper handling and disposal is essential in the successful removal of asbestos roofing. Therefore, select roofers who know regulations and requirements for each project.

Protecting the Property

A roofer hired to remove asbestos roof or replace normal roof must be one who appreciates the need for protecting the property. The fact that the roof is no longer needed on the building does not mean it is alright for the roofer to be careless. The first step a roofer must apply is to protect the property from potential damage. Roof removal is quite risky. The risks apply to the roofer as well as the property. Materials and debris are capable of falling to the ground easily and causing untold damage. The protective measures worth putting in place in the area include the following:

  1. Covering the lower parts of the property
  2. Covering walls with tarps and protective plywood
  3. Covering sidings with tarps and plywood
  4. Covering plants
  5. Covering all structures that might be damaged

Need for Enhanced Protective Measures

Asbestos roof removal requires enhanced protective measures. These measures must be put in place during the initial stage of the project. It helps nobody if you put these measures in place midway through the work. Asbestos Containing Materials – also known as ACMs – are renowned for the toxic fibers they contain. These fibers are responsible for causing different health problems and diseases. Therefore, cordon the area off so that unqualified individuals do not encroach. Keep the area cordoned off to eliminate exposure to these toxic asbestos fibers.

Handling and Disposal

Removing the normal old roof requires paying close to attention just as much as asbestos roof removal. How you handle and dispose of the roofing materials after removing them is just as important as removal, replacement, and installation. The trend, especially with normal roof replacement, is to throw the old materials down on the ground below and dispose them at the local landfill. With asbestos roof removal, this sort of handling will not suffice. In fact, the removed asbestos roofing should not end up in the local landfill. It needs special disposal.

Delicate handling is necessary with asbestos roof removal. Special emphasis is paid to carrying the actual process out. There is no rushing through the process. However, with normal roof replacement, there is no problem if you rush through the process as there is no hazardous stuff to worry about. There are regulations in place that define the clear process one must follow in each step. What you should never do is to use power tools, compressed air, and sanding discs when removing the asbestos roof. Otherwise, you will only cause further contamination.


 

No Comments

Be the first to start a conversation

Leave a Reply

  • (will not be published)